Scotsman SCE275 Bedienungsanleitung PDF herunterladen (Seite 32)

SCE275

January 2003

Page 32

Removal and Replacement: Inlet Valve & Water Trough

Water Inlet Valve

The water inlet valve is located in the lower back of

the cabinet. The hood and bin must be removed to

gain access to this part.

The valve is directly connected to the incoming

water supply. With the water supply turned off, the

connection can be removed from the front of the

machine.

1. Go thru the steps on page to remove the hood

and bin.

2. Locate the inlet water valve. Pull the wire harness

off the terminals of the valve.

3. Remove the cover over the utility connections.

4. Use two wrenches and loosen the nut on the male

flare holding the water supply to the water inlet

connection. Remove the water supply line from the

water inlet valve.

5. Remove the two screws that hold the water inlet

valve to the cabinet.

6. Pull the water inlet valve out and remove the

discharge hose from the outlet of the valve.

7. The valve may now be removed from the ice

machine.

8. Reverse steps 7-1 to replace the valve.

Water Trough

1. See the next page and remove the bin controls

first (steps 1-9).

2. Pull out the cube deflector.

3. Unsnap the trough from the evaporator pins and

rotate the front trough out of the machine.

4. Unsnap the trough from the evaporator pins and

rotate the back trough out of the machine.

5. Reverse to reassemble. Note: The troughs are

marked: FRONT TROUGH and BACK TROUGH.

Begin by hanging the troughs on the evaporator’s

front pins and then rotating the trough until it snaps

onto the back set of pins. Be certain that all 4 pins

are engaged on each trough.

View of Machine Without Bin or Hood

Inlet Water

Valve

Cover Removed From

Utility Bracket

1 2 ... 27 28 29 30 31 32 33 34 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

Scotsman SCE275 Bedienungsanleitung Seite 32

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Scotsman SCE275