Scotsman SCE275 Bedienungsanleitung PDF herunterladen (Seite 5)

Installation

For The Plumber

Begin by planning the installation and obtaining the

needed supplies:

" soft copper tubing

" rigid drain tubing

" FPT fitting for bin/reservoir drain connection

" FPT fitting for condenser drain connection

" FPT fitting for water cooled condenser inlet

connection

1. Connect cold potable water to the

" male flare

at the back of the cabinet. A water filter and hand

shut off valve is recommended. Flush the water

line prior to connecting to the ice machine.

If water cooled, connect a separate water inlet line

to the water cooled condenser inlet fitting. It should

also have a hand shut off valve.

A loop of copper tubing may be used between the

ice machine and the water supply. This will allow

the ice machine to be pulled out from its installed

location without disconnecting the water line. No

back-flow preventer should be needed in the inlet

potable water line because provision for that is

incorporated in this N.S.F. listed product (the water

valve outlet is above the reservoir wall and cannot

siphon).

2. Connect a drain tube to each drain connection

(water cooled drain must be separate).

3. Route the drain tubes to the building drain

receptacle.

SCE275

January 2003

Page 5

CONFORM TO ALL LOCAL CODES

Plumbing Connections,

Water Cooled Shown

Water Cooled Inlet

Water Cooled Drain

Reservoir & Bin

Drain

Potable Water Inlet

Drain Receptacle

Field Supplied Filter

and Hand Valve

1 2 3 4 5 6 7 8 9 10 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

Scotsman SCE275 Bedienungsanleitung Seite 5

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Scotsman SCE275