Scotsman F0522 Wartungshandbuch PDF herunterladen (Seite 3)

Location:

While the machine will operate satisfactorily within

the air and water temperature limits, it will produce

more ice when those temperatures are nearer the

lower limits. Avoid locations that are hot, dusty,

greasy or confined. Air cooled models need plenty

of room air to breathe. Air cooled models must

have at least six inches of space on the left side for

air intake; however, more space will allow better

performance.

Airflow

Air flows into the front of the cabinet and out the

back. The air filters are on the outside of the front

panel and are easily removed for cleaning.

Options

Side air intake kits KPFSA223 or KPFSA227 for air

cooled models.

The standard machine will make ice until ice fills

the bin and blocks an infrared light beam inside the

bottom of the machine. A field installed kit is

available to adjust the ice level lower. That kit

number is KVS.

The standard controller has excellent diagnostic

capabilities and communicates to the user through

the AutoAlert light panel, seen through the front

panel. There is a field installed kit that can log data

and provide additional information when the front

panel is removed. That kit number is KSBU. A

similar kit adds network connectivity, and its

number is KSBU-N.

Bin compatibility

All models are the same width: 22 inches. All

models are the same depth: 24 inches.

Bin & adapter list:

•

B222S – no adapter needed

•

B322S – no adapter needed

•

B330P – Use KBT27

•

B530P – Use KBT27

•

B842S – Use KBT39

•

B948S - Use KBT38 for a single unit

•

B948S – Use KBT38-2X for two units side by

side

•

BH1100, BH1300 and BH1600 upright bins

include filler panels to accommodate a 22

inch wide ice machine. No adapter is

needed.

Dispenser compatibility

Only nugget ice models may be used with ice

dispensers. Flaked ice is not dispensable.

• ID150 – use KBT42, KVS, KNUGDIV and

R629088514

•

ID200 – use KBT43 and KNUGDIV and KVS

•

ID250 – use KBT43 and KNUGDIV and KVS

See sales literature for other brand model ice and

beverage dispenser applications.

Other Bins & Applications:

Note the drop zone and ultrasonic sensor locations

in the illustrations on the next pages.

Scotsman ice systems are designed and

manufactured with the highest regard for safety

and performance.

Scotsman assumes no liability of responsibility of

any kind for products manufactured by Scotsman

that have been altered in any way, including the

use of any part and/or other components not

specifically approved by Scotsman.

Scotsman reserves the right to make design

changes and/or improvements at any time.

Specifications and design are subject to change

without notice.

September 2009

Page 3

N0422, F0522, N0622, F0822, N0922, F1222, N1322, F1522

Air, Water or Remote Service Manual

1 2 3 4 5 6 7 8 ... 50 51

Kommentare zu diesen Handbüchern

Keine Kommentare

Scotsman F0522 Wartungshandbuch Seite 3

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Eiswürfelmacher Scotsman F0522