Scotsman FME1500R Wartungshandbuch PDF herunterladen (Seite 20)

ICEMAKER MAINTENANCE:

1. The bin control uses devices that sense light,

therefore they must be kept clean enough so that

they can "see". At least twice a year, remove the

bin control sensors from the base of the ice chute,

and wipe the inside clean, as illustrated.

2. The ice machine senses water level by a probe

located in the water reservoir. At least twice a

year, the probe should be removed from the

reservoir, and the tip wiped clean of mineral

build-up.

3. The top bearing in the breaker should also be

checked at least two times per year.

Check the thrust bearing by:

••removing the ice chute cover

••unscrewing the ice sweep

••removing the water shed

••unscrewing the breaker cover

••unscrewing the auger stud

Inspect the assembly, looking for wear .

4. Clean the remote condenser. Use a vacuum

cleaner or coil cleaner if needed.

Do NOT use a wire brush.

5. Check and tighten all bolts and screws.

ICE DISCHARGE

CHUTE

SLIDE IN AND

OUT

ICE LEVEL

SENSORS

WATER

RESERVOIR

WATER

LEVEL

SENSOR

/////////////////////////////////////////

CAUTION: SENSOR TIP

IS MADE OF GLASS

///////////////////////////////////////////

ICE

SWEEP

BREAKER

COVER

BREAKER

FME1500R

June 1994

Page 20

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

FME1500R 1
)257+(,167$//(5 2

Kommentare zu diesen Handbüchern

Keine Kommentare

Scotsman FME1500R Wartungshandbuch Seite 20

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Eiswürfelmacher Scotsman FME1500R