Scotsman CME456 Handbuch PDF herunterladen (Seite 5)

Pre-Installation

Other Applications:

Check Scotsman sales information for

recommendations regarding applications.

Do not place Air Cooled models where the noise

from the fan(s) will be objectionable.

Check the nameplate for electrical requirements.

The nameplate is located on the back of the ice

machine. While the model and serial number are

on the nameplate, a serial number plate is

located at the front of the machine, near the

controller.

Water:

There is no such thing as pure water. All water

contains some impurities. There are two ways

water carries the impurities: suspended and

dissolved. Suspended solids can be filtered out.

Dissolved solids must be diluted or treated. Water

filters are recommended to remove suspended

solids. Some filters also have treatment in them for

dissolved solids. Check with a water treatment

service for a recommendation.

Cube Ice machines use more water than what

ends up in the bin as ice. While most water is used

during ice making, a portion is designed to “rinse"

out the water system to keep hard water scale

from clogging up the machine. That water rinse,

combined with water filters, prolongs the times

between needed water system cleaning.

Note: All Scotsman CM

models, like those

described in this manual, feature Scotsman’s

AutoIQ™ control system and ReliaClean™ water

system cleaning process.

Service Technicians: All models covered here

come set from the factory at a “standard” water

rinse, which is compatible with typical water

conditions. They may be adjusted to “Minimum" or

“Maximum" water rinse after start up. If the prior

ice machine worked acceptably well with the local

water conditions, leave the machine at the factory

setting. If severe water conditions are present, and

water filters do not solve the problem acceptably,

adjust the machine to use more water. If water

conditions are excellent, adjust the machine to use

less water. See the Adjustments section.

Note: Water use adjustments are customer

convenience adjustments; they are NOT factory

defects and are NOT covered by warranty.

Note: Slope front bins must have an internal baffle.

Scotsman’s BH375 has the required baffle. Baffle

must be approximately in the position shown in the

diagram.

CME306 & CME456

January 2000

Page 5

12.0"

4.0"

Side View

Baffle

Nameplate on Back Panel

Serial Number Plate, Remove

Front Panel to Locate

1 2 3 4 5 6 7 8 9 10 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare

Scotsman CME456 Handbuch Seite 5

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Eiswürfelmacher Scotsman CME456