Scotsman CSW45 Bedienungsanleitung PDF herunterladen (Seite 14)

Cleaning the Interior Components

1. Unplug ice maker or disconnect power.

2. Open the storage bin door and remove any ice

that is in the bin.

3. Remove the drain cap from the water pan and

drain thoroughly. Replace the drain cap.

4. Remove the three screws that hold the cutter grid

cover in place.

5. Unplug the wiring harness from the left side of the

cutter grid.

1. Cutter Grid Cover

2. Screws

6. Unplug the ice level sensor from the right side of

the cutter grid. Pull the ice level sensor down and

forward away from the cutter grid.

7. Remove the right-hand screw and loosen the

left-hand screw. Lift the cutter grid up and out and

over the left-hand screw.

NOTE: Make sure the plastic spacer from the

right-hand side of the cutter grid bracket stays with

the cutter grid.

1. Cutter Grid Harness

2. Screw

3. Cutter Grid

4. Ice Level Sensor Harness

5. Plastic Spacer

6. Screw

CSW45

July 1999

Page 14

Electrical Shock Hazard

Failure to follow these

instructions can result in

death, fire, or electrical

shock.

Disconnect power before

servicing.

Replace all panels before

operating.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Keine Kommentare

Scotsman CSW45 Bedienungsanleitung Seite 14