Scotsman CSWE1 Handbuch PDF herunterladen (Seite 13)

Service Diagnosis

Problem Probable Cause Possible Solution

Water pump will not run Pump binding in housing Locate and remove cause of

binding

Open circuit in pump motor Replace pump

Open circuit to pump Check wiring

Defective evaporator thermostat Replace thermostat

Water tank empty On initial start up, water will not

be in the tank until the evaporator

thermostat stops the freeze cycle.

Normal

Open circuit to water solenoid Locate and repair wiring

Complete water line restriction Check for closed shut off valve

Defective evaporator thermostat Replace

Water valve stuck closed Replace valve

Open coil on inlet water valve Replace valve

Water inlet tube from water valve

not directing water to tank

Position outlet end of tube into

water pan

Water inlet screen or filter plugged Clean screen, replace filter

White ice cubes Water too hard (in excess of 400

ppm)

Water needs treatment

Insufficient water supply in tank Check for why not enough water

Machine harvests ice too fast -

less than one minute

Taste in ice Foods stored in bin Do not put foods in the bin

Packaging material not all

removed

Remove all packaging

Too much noise Check tubing rattle from contact

with tubes, cabinet, etc.

Reposition tubing

CSWE1

December 1995

Page 13

1 2 ... 8 9 10 11 12 13 14 15

Keine Kommentare

Scotsman CSWE1 Handbuch Seite 13