Scotsman CU0715 Wartungshandbuch PDF herunterladen (Seite 26)

August 2013

Page 25

Service Manual for Models CU0415, CU0715 and CU0920

Removal and Replacement

Pump

1. Disconnect electrical power.

2. Remove top panel.

3. Remove wall panel covering pump.

4. Disconnect wires from pump motor.

5. Removecubedeectorandpullhoseoffwater

pump outlet.

6. Rotate pump slightly CW and lift pump up and out

of the ice machine.

7. Install new pump in reverse order of the removal

steps.

Spray Platform

1. Remove front panel.

2. Shut unit off.

3. Opendoor,removecubedeectorbyliftingitup,

twisting slightly and pulling out.

4. Pull spray platform forward unit it releases from its

snap, and remove pump hose from platform.

5. Remove platform from the unit. Replace or service

and then reinstall it.

6. Reconnect pump hose.

7. Slide platform back into reservoir.

Note: Bottom of platform has a raised area that

ts only on the left side. Be sure platform is

placed all the way back in the reservoir and is

snapped in place.

8. Reinstallcubedeector,besureitissnappedonto

the reservoir wall.

9. Switch unit on, check spray pattern.

Wall Panel

Spray Platform Service

The two halves may be separated by removing the

clips and pulling it apart. Be sure gasket is intact and

installed correctly.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31

Keine Kommentare

Scotsman CU0715 Wartungshandbuch Seite 26