Scotsman CME456 Handbuch PDF herunterladen (Seite 28)

Additional Maintenance: Water Level Sensor

Water Level Sensor:

Clean the lenses inside the water level sensor.

1. Remove front panel.

2. Push and hold the Off button until the ice

machine stops.

3. Unplug the wire harness from the sensor.

4. Remove the reservoir cover.

5. Lift up on cover and pull float from float stem.

6. Unsnap sensor from cover. Remove the sensor

from its installed position.

7. Remove dust cover.

8. Wipe lenses clean with a cotton swab.

Reverse to reassemble.

Note: Be CERTAIN that the sensor has be

properly reassembled. Wire connection must be in

the position shown in the photos.

CME306 & CME456

January 2000

Page 28

Dust Cover

Lenses

Water Level

Sensor

Float Stem

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 39 40

Keine Kommentare

Scotsman CME456 Handbuch Seite 28