Scotsman C1848R Bedienungsanleitung PDF herunterladen (Seite 18)

Adjustments

Bridge Thickness - For A Service Tech Only

1. Push and hold Off till the machine stops.

2. Remove evaporator cover.

3. Remove curtain.

4. Use a box wrench and rotate the bridge

thickness adjustment screw in 1/8 turn

increments CW to increase bridge thickness.

Rotate CCW to decrease bridge thickness.

Caution: Do not make the bridge too thin or the

machine will not harvest properly. Bridge thickness

adjustments are not covered by warranty.

5. Return curtain to its normal position.

6. Push and release the On button. Check next

harvest of ice. Repeat steps 1-6 if needed.

Water purge setting

The water purge is factory set to the automatic

position, suitable for most water conditions. The

setting can be changed to one of 5 manual settings

or left on automatic.

purge

setting

Minimum

Moderate

3 - Standard

Heavy

Maximum

A - Automatic

Water

Type

RO water

equivalent

Factory

Setting for

typical water

High TDS

water

Any with

conductivity not

less than 10

microSiemens/cm

To set:

1. Switch the machine OFF by holding the Off

button in until a number or the letter A shows

on the display.

2. Press and release the On button repeatedly

until the number on the display corresponds to

the desired setting.

3. Press and release the Off switch again to

return to the normal control state.

November 2006

Page 17

C1448, C1848, C2148

Remote Condenser Models - User Manual

Ice Bridge Thickness Measurement

Too Big

Too Small

Just Right,

Small Cube

1/8 - 3/16"

bridge

Just Right,

Medium Cube

Ice Thickness Sensor

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24 25 26

Kommentare zu diesen Handbüchern

Keine Kommentare

Scotsman C1848R Bedienungsanleitung Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Eiswürfelmacher Scotsman C1848R